TM 55-1520-240-23-9
11-17
REMOVE DAMAGED RIG PIN FROM THRUST CONTROL
(Continued)
11-17
3.
Remove 32 screws (11) and washers (12) from
housing (13) of left landing light housing (14).
Remove housing.
Wires must not support housing;
otherwise, damage to equipment
could occur.
4.
Remove left landing light housing (14) from
access (15). Support housing so it does not
hang by wires (16).
5.
Remove gasket (17) from housing (14).
6.
Strap housing (14) to access (15) at aft end
of access with strap (18). Wires (16) must not
support housing. Use strap (E376).
11-70
