TM 55-1520-240-23-9
11-212
REMOVE FORWARD LCT YOKE
(Continued)
11-212
7.
Remove four screws (13) and access plate (14)
from bulkhead (15) aft of yoke (5).
8.
Remove cotter pin (16), nut (17), and washer
(18).
9.
Using aluminum bar carefully, drive out yoke
support shaft (19). Have helper support yoke (5).
10.
Lift out yoke (5) from yoke mount (20).
NOTE
Ensure slider bushing (21) is not
removed and remains with yoke
mount (20).
11.
Install shaft (19), washer (18), and nut (17) in
mount (20). Do not torque nut.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-841
