TM 55-1520-240-23-9
11-191
INSTALL SECOND STAGE MIXING ASSEMBLY
(Continued)
11-191
INSTALL PITCH AND THRUST RIGHT OUTPUT LINK
63.
Remove nut (106), two washers (107 and 108)
and bolt (109) from bellcrank (53).
FLIGHT SAFETY PARTS
This is an installation critical flight
safety part. All aspects of its assembly
and installation must be ensured.
Ensure bearings are properly staked.
Ensure link is properly installed with
part number facing upwards.
Ensure proper attaching hardware
(impedance type bolt, nut, and
washers) is installed including
verification of bolt head orientation,
torque, and installation of cotter pins.
Loose attachments within flight control
primary linkage will degrade aircraft
control. Missing components will
cause loss of control.
64.
Position pitch and thrust right output link (110)
in bellcrank (53), part number (111) facing up.
Install bolt (109), two washers (108 and 107) and
nut (106). Do not torque nut at this time.
65.
Remove nut (112), two washers (113 and 114)
and bolt (115) from outward end of bellcrank (23).
66.
Position link (110) in bellcrank (23). Install bolt
(115), two washers (114 and 113) and nut (112).
Do not torque nut at this time. Remove tag.
11-783
