INSTALL SECOND STAGE MIXING ASSEMBLY
INSTALL FORWARD RIGHT UPPER LINK
Remove nut (55), two washers (56 and 57), and
bolt (58) from bellcrank (53).
FLIGHT SAFETY PARTS
This is an installation critical flight
safety part. All aspects of its assembly
and installation must be ensured.
Ensure that both rod end jam nuts are
installed and torqued.
Ensure that the rivet through the fixed
rod end bearing is secure.
Ensure proper attaching hardware
(impedance type bolt, nut, and
washers) is installed including
verification of bolt head orientation,
torque, and installation of cotter pins.
Loose attachments within flight control
primary linkage will degrade aircraft
control. Missing components will
cause loss of control.
Position forward right upper link (59) in bellcrank
(53), adjustable end aft. Install bolt (58), two
washers (57 and 56), and nut (55). Do not torque
nut at this time. Remove tag.
Remove nut (60), two washers (61 and 62) and
bolt (63) from bellcrank (46).
Position link (59) in bellcrank (46). Install bolt
(63), two washers (62 and 61), and nut (60). Do
not torque nut at this time. Remove tag.