TM 55-1520-240-23-9
11-178.1
REPAIR YAW, THRUST, ROLL, OR PITCH ILCA INTERMEDIATE CONNECTING LINKS
(AVIM)
(Continued)
11-178.1
5.
Remove bearing (3) from link (1). Remove
the inner lip of the roller swage (see figure).
Make sure that the lip of the sleeve has been
completely removed before pressing out the
beating. Failure to fully remove the lip may result
in damage to the ink. Support the link in an arbor
press (TM 55-1500-322-24) and press out the
bearing in the direction shown in the figure.
11-710