TM 55-1520-240-23-9
11-177
ADJUST PITCH CONTROL POSITION TRANSDUCER (CPT)
(Continued)
11-177
INSPECT
16.
Have helper press switch (10) and move stick
(9) fully aft.
17.
Check display (6). Display will indicate +2 to +4
vac.
18.
Move stick (9) fully forward.
19.
Check display (6). Display will indicate between
-4 to -6 vac.
20.
Remove pin (7) from fixture (12). Remove
quadrant (11).
21.
Position stick (9) at about neutral. Release switch
(10). Remove clamp (15) and pointer (14) from
stick.
22.
Set MASTER POWER switches (1 and 2) of test
set (3) to OFF.
23.
Set METER SOURCE switch (4) to OFF.
FOLLOW-ON MAINTENANCE:
Remove hydraulic power.
Remove electrical power.
Remove AFCS line test set (TM 55-4920429-13).
Install closet backup panel (Task 2-2).
Install closet acoustic blanket (Task 2-108).
Remove copilots stick yoke (Task 11-23).
Remove copilots rigging fixture (Task 11-23).
END OF TASK
11-706