TM 55-1520-240-23-9
11-88
INSTALL COCKPIT CONTROL TRANSFER BELLCRANKS
(Continued)
11-88
CONNECT ROLL CONNECTING LINKS
28.
Remove nut (47), two washers (48 and 49), and
bolt (50) from lower forward arm (17) of bellcrank
(15).
29.
Untie roll transfer connecting link (51). Position
link in lower forward arm (17) of bellcrank (15).
Install bolt (50), two washers (49 and 48), and
nut (47). Do not torque nut at this time.
30.
Remove nut (52), two washers (53 and 54), and
bolt (55) from aft lower arm (56) of bellcrank (15).
31.
Untie roll idler connecting link (57). Position link
in aft lower arm (56) of bellcrank (15). Install bolt
(55), two washers (54 and 53), and nut (52). Do
not torque nut at this time.
32.
Remove nut (58), two washers (59 and 60), and
bolt (61) from upper arm (62) of bellcrank (15).
33.
Untie roll ILCA connecting link (63). Position link
in upper arm (62) of bellcrank (15). Install bolt
(61), two washers (60 and 59), and nut (58). Do
not torque nut at this time.
34.
Remove tags from links (51, 57, and 63) and
bellcrank (15).
11-474
