TM 55-1520-240-23-9
11-88
INSTALL COCKPIT CONTROL TRANSFER BELLCRANKS
(Continued)
11-88
17.
Install bolt (7), two washers (22 and 23), and nut
(24) in support (5). Do not tighten nut at this time.
18.
Install bushing (25) in support (6).
19.
Install large washer (26), washer (27), and nut
(28) on shaft (3). Tighten nut until there is no
inboard or outboard movement of bellcranks (8,
12, 15, and 19) and bellcranks are free to rotate.
Back off nut to align nearest cotter pin hole.
Install cotter pin (29).
20.
Torque nut (24) to 30 to 45 inch-pounds. Install
cotter pin (30).
INSPECT
11-472
