TM 55-1520-240-23-9
11-86
INSTALL COCKPIT CONTROL TRANSFER CONNECTING LINKS
11-86
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 30 to 150 Inch-Pounds
Materials:
Acetone (E20)
Cloths (E120)
Sealant (E336)
Gloves (E186)
Parts:
Gasket
Cotter Pins
Personnel Required:
Medium Helicopter Repairer (2)
Inspector
References:
TM 55-1520-240-23P
Task 11-46
General Safety Instructions:
Make sure bushings are in bellcranks
before installing bolts; otherwise,
damage to bellcranks will result.
Acetone (E20) can form toxic
vapors if exposed to flame. Use in
well-ventilated area, away from open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
NOTE
Impedance bolts are installed in flight
control connections. These bolts are
self-retaining and require special nut
and torque (Task 1-13).
11-451