TM 55-1520-240-23-9
11-85
REMOVE COCKPIT CONTROL TRANSFER CONNECTING LINKS
(Continued)
11-85
12.
Working from passageway, remove cotter pin
(22), nut (23), two washers (24), and bolt (25)
from bellcrank (26).
13.
Disconnect yaw link (14) from bellcrank (26).
Move link aft.
14.
Install bolt (25), two washers (24), and nut (23)
in bellcrank (26).
15.
Working from cockpit, lift link (14) upward and
forward through oval access (27). Remove link.
16.
Working from passageway, remove cotter pin
(28), nut (29), two washers (30), and bolt (31)
from bellcrank (32).
17.
Disconnect roll link (21) from bellcrank (32).
Move link aft.
18.
Install bolt (31), two washers (30), and nut (29)
in bellcrank (32).
19.
Working from cockpit, lift link (21) upward and
forward out of oval access (27). Remove link.
REMOVE PITCH AND THRUST TRANSFER
CONNECTING LINKS
20.
Working through left access (5), align bolt (33)
and hole (34). Remove cotter pin (35), nut (36),
two washers (37), and bolt (33) from bellcrank
(38).
21.
Tag and disconnect thrust connecting link (39)
from bellcrank (38).
22.
Install bolt (33), two washers (37), and nut (36)
in bellcrank (38).
23.
Remove cotter pin (40), nut (41), two washers
(42), and bolt (43) from bellcrank (44).
24.
Tag and disconnect pitch connecting link (45)
from bellcrank (44).
25.
Install bolt (43), two washers (42), and nut (41)
in bellcrank (44).
11-449
