TM 55-1520-240-23-9
11-83
REMOVE STICK PITCH POSITION INDICATOR
(Continued)
11-83
14.
Working from cockpit, remove lockwire from tube
adjuster (23).
15.
Remove tube nut (24) from top of adjuster (23).
16.
Remove screw (25) and washer (26) from mount
(27) and clamp (28). Remove clamp from tube
(29).
17.
Remove screw (30), spacer (31), washer (32),
and nut (33) from clamp (34). Remove clamp
from tube (29).
18.
Disconnect cap (35) from indicator (36). Turn
counterclockwise. Remove lamp (37) from cap.
19.
Remove four bolts (38), eight washers (39), and
four nuts (40) from two mounts (41).
Do not kink or deform tubing or cable;
otherwise, damage to component will
result.
20.
Remove indicator (36), tubing (29), and cable
(17) from adjuster (23). Guide aft.
21.
Remove screw (42) and washer (43) from mount
(44) and clamp (45). Remove clamp from tube
(46).
22.
Slide washer (47), nut (22) from tube (46).
Remove nut.
23.
Remove adjuster (23) and tube (46).
24.
Remove lockwire from indicator (36) and nut (48).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
11-441
