TM 55-1520-240-23-9
11-61
REMOVE THRUST CONTROL (PILOT)
(Continued)
11-61
3.
Tilt light (3) and housing assembly (5) to one
side and support it.
4.
Remove nut (6) and washer (7) from ground stud
(8). Disconnect electrical lead (9).
5.
Lower housing assembly (5). Support housing
assembly so it does not hang. Use strap (E376).
Remove gasket (10).
6.
Disconnect electrical connector (11). Remove
two nuts (12), two clamps (13), and two spacers
(14) from two screws (15). Remove clamps (13)
from cable (16). Do not remove screws (15) from
panel (17).
11-280