TM 55-1520-240-23-9
11-52.1
ADJUST FIRST AND SECOND-STAGE BELLCRANK THRUST UP INBOARD AND YAW
RIGHT OUTBOARD STOPS
(Continued)
11-52.1
15.
Torque four nuts (30, 37, 44, and 50) to 60 to 90
inch-pounds. Install four cotter pins (29, 36, 43.
and 49). Check four bolts (33, 40, 47, and 53).
Bolts shall not rotate with torque less than 10
inch-pounds. There shall be no axial looseness.
If bolt rotates or is loose, add washer under nut
and repeat step 15.
16.
Working in passageway, untie and position link
(28) in bellcrank (27). Install bolt (26), two
washers (25 and 24) and nut (23).
17.
Untie and position link (21) in bellcrank (20).
Install bolt (19), two washers (18 and 17), and
nut (16).
18.
Untie and position link (14) in bellcrank (13).
Install bolt (12), two washers (11 and 10), and
nut (9).
19.
Untie and position link (7) in bellcrank (6). Install
bolt (5), two washers (4 and 3), and nut (2).
11-232
