TM 55-1520-240-23-9
11-52.1
ADJUST FIRST AND SECOND-STAGE BELLCRANK THRUST UP INBOARD AND YAW
RIGHT OUTBOARD STOPS
(Continued)
11-52.1
NOTE
Outboard thrust up stop (55) at 11.0
BL is preset at a fixed dimension and
should not be adjusted.
9.
Position bellcrank (34) against fixed stop (55),
adjust inboard stop (56) at 8.46 BL so both stops
contact bellcrank.
NOTE
Inboard right hand pedal forward
stop (57) at 12.36 BL is preset at a
fixed dimension and should not be
adjusted.
10.
Position bellcrank (41) against fixed stop (57),
adjust outboard stop (58) at 15.28 BL so both
stops contact bellcrank.
Bushings must be in bellcranks before
installing bolts; otherwise, damage to
components will result.
NOTE
Impedance bolts are installed in flight
control connections. These bolts are
self-retaining and require a special
nut and torque (Task 1-13).
11.
Have helper working from left forward platform,
untie and position link (54) in bellcrank (41).
Install bolt (53), two washers (51 and 52), and
nut (50).
12.
Untie and position link (48) in bellcrank (34).
Install bolt (47), two washers (45 and 46), and
nut (44).
13.
Untie and position link (42) in bellcrank (41).
Install bolt (40), two washers (38 and 39), and
nut (37).
14.
Untie and position link (35) in bellcrank (34).
Install bolt (33), two washers (31 and 32), and
nut (30).
11-231
