TM 55-1520-240-23-9
11-42
RIG COCKPIT CONTROL ASSEMBLIES
(Continued)
11-42
71.
Remove pin (63) from pilot’s control support (65).
72.
Remove pin (57) from copilot’s control support
(59).
Acetone (E20) is extremely flammable.
It can be toxic. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes or clothing.
Keep away from heat, sparks, or open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
73.
Working outside aircraft, clean sealant from
flange (80) and inside surface (81) of access
(36). Use acetone (E20) and cloths (E120). Use
gloves (E186).
74.
Support landing light housing (35). Remove
strap (39).
Sealant (E336) can irritate skin and
cause burns. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
75.
Apply sealant (E336) to both sides of new gasket
(38). Install gasket on flange (80). Remove
excess sealant with acetone (E20) and cloths
(E120). Use gloves (E186).
76.
Tilt housing (35) and position inside access (36),
lamp (82) aft. Align housing and access holes
(83).
11-175
