TM 55-1520-240-23-9
11-273
INSTALL AFCS PANEL ASSEMBLY
11-273
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
1.
Position AFCS panel assembly (1) in console (2),
control knob (3) lower right.
2.
Position panel assembly (1) for access to two
receptacles (4 and 5).
3.
Connect connector (6) to receptacle (4). Remove
tag.
4.
Connect connector (7) to receptacle (5). Remove
tag.
INSPECT
5.
Repeat step 1, then go to step 6.
6.
Tighten four fasteners (8) on panel assembly (1)
by pressing fastener down and turning clockwise
1/4 turn.
INSPECT
FOLLOW-ON MAINTENANCE:
Perform operational test of advanced flight control
system (TM 55-1520-240-T).
END OF TASK
11-1049
