TM 55-1520-240-23-9
11-272
BENCH TEST AFCS CONTROL PANEL (AVIM)
(Continued)
11-272
TEST 7
PANEL ILLUMINATION
NOTE
Perform preliminary test procedure
before test.
(Refer to TM
55-4920-430-13.)
103.
Set TESTER POWER switch (1) to ON. The
following lamps shall be on:
a.
115V 400 HZ lamp (2).
b.
+28VDC lamp (3).
c.
+5VDC lamp (4).
d.
+15VDC lamp (5).
e.
-15VDC lamp (6).
104.
Set AFCS POWER switches (7 and 8) to ON.
The following lamps shall be on:
a.
115V 400 HZ lamp (9).
b.
+28VDC lamp (10).
c.
+5VDC lamp (11).
105.
Check AFCS panel (30). All panel illumination
lamps shall be on and red in color.
106.
Set TESTER POWER switch (1) and AFCS
POWER switches (7 and 8) to OFF.
107.
Disconnect test cable W4 145G5180-1 (31) from
AFCS panel (30) receptacle J1 (32).
108.
Disconnect test cable W5 145G5181-1 (33) from
AFCS panel (30) receptacle J2 (34).
END PANEL ILLUMINATION TEST
11-1047