TM 55-1520-240-23-8
10-113
REMOVE FUEL CROSSFEED VALVE
(Continued)
10-113
NOTE
There are two fuel crossfeed valves.
Procedure is same to remove either
valve. No. 2 (right side) valve is
shown here.
1.
Make sure manual override crossfeed valve (1)
is CLOSED.
2.
Disconnect electrical connector (2) from valve
(3).
3.
Remove nut (4), screw (5), two washers (6),
electrical lead (7), and clip (8).
4.
Disconnect hose (9) from adapter (10). Remove
packing (11). Use container for any spilled fuel.
Plug hose.
5.
Remove electrical lead (12), bolt (13), nut (14)
and two washers (15) from adapter (16).
6.
Remove lockwire, four bolts (17) and washers
(18).
7.
Remove valve (3) and packing (19) from tee (20).
Plug hole in tee. Clean up any spilled fuel. Use
cloths (E135).
10-487