TM 55-1520-240-23-8
10-111
REMOVE ENGINE FUEL SHUTOFF VALVE
(Continued)
10-111
NOTE
There are two engine fuel shutoff
valves. Procedure is same to remove
either valve. No. 2 (right side) valve is
shown here.
1.
Make sure manual override crossfeed valve (1)
is in CLOSED position.
2.
Disconnect electrical cable (2) from valve (3).
3.
Remove nut (4), two washers (5), screw (6),
electrical load (7) and clip (8).
4.
Disconnect hose (9) from adapter (10). Plug
hose.
5.
Remove nut (11), bolt (12) and electrical lead
(13) from flange of tee (14).
6.
Remove lockwire, four bolts (15) and washers
(16) from valve (3).
7.
Remove valve (3) and packing (17). Use
container for any spilled fuel.
8.
Remove lockwire, four bolts (18), four washers
(19) and electrical lead (20) from valve (3).
Remove adapter (10) and packing (21).
9.
Plug port in tee (14).
10.
Wipe up spilled fuel. Use cloths (E135).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
10-483