TM 55-1520-240-23-8
10-44
INSTALL MAIN FUEL TANK VENT ASSEMBLY
(Continued)
10-44
25.
Remove tags and plugs from hose (72) and tube
(73). Install tube if removed. Position hose in
fuel cell (4).
26.
Connect hose connector (74).
27.
Position tube clamp (75) and tube clamp (76).
Install screw (77), washer (78), and nut (79).
28.
Install two screws (80) and washers (81) to
connect tube clamp (82) to tank cell (4).
29.
Remove tags and plugs from hose (83). Position
hose in cell (4). Remove cap from drain valve
(84). Connect 90º connector (85) to valve.
30.
Remove tag and plug from hose connector (86)
and caps from tee (87). Connect hose to tee.
31.
Connect hose (72) to tee (87).
32.
Position hose clamp (88) and electrical wire
clamp (89). Install screw (90), washer (91), and
nut (92).
INSPECT
10-224