TM 55-1520-240-23-8
10-44
INSTALL MAIN FUEL TANK VENT ASSEMBLY
(Continued)
10-44
10.
Remove plugs and tags from hose (26). Position
hose in fuel cell (4). Connect hose connector
(27).
11.
Remove plugs and tags from tube (28). Position
tube and ring (29). Connect hose connector (30).
12.
Remove plugs and tags from hose (31). Position
ring (29). Connect hose connectors (32 and 33).
13.
Position two clamps (34). Install two washers
(35) and screws (36).
14.
Remove tags and plugs from hose and tube
assembly (37) and position assembly in fuel cell
(4) through forward access hole (1). Make sure
flexible hose with 90º connector is at aft end of
fuel cell.
15.
Connect hose connector (38).
16.
Install screw (39), washer (40), and nut (41) to
connect clamp (42) on hose (43) to clamp (44)
on tube (28).
10-222
