TM 55-1520-240-23-8
10-44
INSTALL MAIN FUEL TANK VENT ASSEMBLY
(Continued)
10-44
17.
Position clamp (45). Install bolt (46), washer
(47), and nut (48).
18.
Position clamp (49). Install bolt (50) and washer
(51).
19.
Install bolt (52), washer (53), and nut (54) to
connect clamp (55) on hose (56) to clamp (57)
on tee (58).
NOTE
Pipe assembly must be positioned
so that no high or low spots in the
assembly can trap fluids. Clamps and
spacers must be positioned to remove
slack in hose and ensure a level tube.
20.
Position pipe assembly (59), clamp (60) and
spacer (61). Install washer (62) and screw (63).
21.
Remove tags from four spacers (64) and position
as indicated.
22.
Position four clamps (65). Install four washers
(66) and screws (67).
23.
Position two hose clamps (68) and spacer (69).
Install washer (70) and screw (71).
24.
Check that no high or low points occur in pipe
assembly (59).
10-223
