TM 55-1520-240-23-7
9-121
INSTALL TROOP WARNING BOX
(Continued)
9-121
12.
Remove screw (23) and gong (24).
13.
Remove two nuts (26) and washers (27).
14.
Remove tape and connect three wires (25).
Install two nuts (26) and washers (27). Remove
tags.
15.
Install gong (24) and screw (23).
INSPECT
16.
Position cover (6) on box (1) and tighten four
screws (5).
Cement (E107) is flammable and
toxic. It can irritate skin and cause
burns. Use only in well-ventilated
area, away from heat and open flame.
In case of contact, immediately flush
skin or eyes with plenty of water for
at least 15 minutes. Get medical
attention for eyes.
17.
Cut pile tape (28) (E402) to required length, and
apply cement (E107) to back of tape. Use gloves
(E186).
18.
Install pile tape (28) (E402) on structure (29) as
shown.
19.
On forward box (1) only, install blanket (30)
around box.
FOLLOW-ON MAINTENANCE:
Test operation of troop warning box (TM
55-1520-240-T).
END OF TASK
9-464