INSTALL OVERHEAD PANEL LIGHTING POTENTIOMETER, LIGHTING CONTROL TRANSFORMERS, OR ROTARY SWITCH (Continued)

INSTALL OVERHEAD PANEL LIGHTING POTENTIOMETER, LIGHTING CONTROL TRANSFORMERS, OR ROTARY SWITCH (Continued) - TM-55-1520-240-23-7_793

INSTALL OVERHEAD PANEL LIGHTING POTENTIOMETER, LIGHTING CONTROL TRANSFORMERS, OR ROTARY SWITCH (Continued) - TM-55-1520-240-23-7_795

TM-55-1520-240-23-7 CH-47D Heilcopter Manual
Page Navigation
761

TM 55-1520-240-23-7 9-101.2 INSTALL OVERHEAD PANEL LIGHTING POTENTIOMETER, LIGHTING CONTROL TRANSFORMERS, OR ROTARY SWITCH (Continued) 9-101.2 22. Install panel (28) in overhead panel (16). 23. Remove tape and install wire (36). Solder wire end (37) onto terminal (38) of light housing (39). Remove tag. 24. Remove tape and solder five wires (40) to resistor (27). Remove tags. 25. Remove tape and install 16 wires (41), washers (42) and screws (43) on four switches (44). Remove tags. INSPECT 26. Raise panel (16). Install two bolts (45) and washer (46). 9-409

Privacy Statement
Press Release
Contact