TM 55-1520-240-23-7
9-100
INSTALL OVERHEAD PANEL PANELS
(Continued)
9-100
Wires must not touch moving
components; otherwise damage to
wires or fire can result.
ENGINE CONDITION PANEL
1.
Install ENGINE CONDITION panel as follows:
a.
Position panel (1) on panel (2). Tighten four
screws (3).
b.
Connect two electrical connectors (4) to two
engine controls (5). Remove tags.
INSPECT
NOTE
If no other panels are to be installed,
go to step 13.
9-389
