INSTALL FORWARD FORMATION LIGHTS
Slide wires (2 and 4) in housing (1). Position light
(5) on housing. Install six screws (7).
Sealant (E336) can irritate skin and
cause burns. Avoid contact with skin,
eyes, and clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Apply sealant (E336) to six screws (7) and edge
of light (5) on housing (1). Wear gloves (E186).
Perform operational check (TM 55-1520-240-T).
END OF TASK