TM 55-1520-240-23-7
9-82
REMOVE FORWARD FORMATION LIGHTS
9-82
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairer’s Tool Kit, NSN 5180-00-323-4915
Materials:
Paper Tags (E264)
Tape (E385)
Personnel Required:
Aircraft Electrician
Equipment Condition:
Battery Disconnected (Task 1-39)
Electrical Power Off
1.
Cut sealant from edge of light (1), and six screws
(2).
2.
Remove screws (2) from light (1).
3.
Pry light (1) from housing (3).
4.
Pull two wires (4) from housing (3) until two
connectors (5) are out of housing. Tag two wires.
Use tags (E264).
5.
Cut two sleeves (6) from connectors (5).
Disconnect connectors. Remove light (1).
6.
Tape ends of wires (4). Use tape (E385).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-274
