TM 55-1520-240-23-7
9-35
REMOVE GENERATOR CONTROL PANEL
(Continued)
9-35
NOTE
Procedure is same to remove No.
1 or No. 2 generator control panel.
Removal of No. 1 panel is shown
here.
1.
Remove nut (1) and washer (2). Disconnect wire
(3).
2.
Disconnect electrical connector (4) from panel
(5).
3.
Remove four screws (6) and washers (7).
4.
Remove panel (5).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-115