TM 55-1520-240-23-7
8-104
INSTALL PILOT’S INSTRUMENT PANEL
(Continued)
8-104
15.
Position TB2 (41) on panel (1). Install two screws
(42) and nuts (43). Install module directly above
each nut.
16.
Remove tape and insert three wires (44) and two
wires (45) through holes in panel (1).
17.
Install three wires (44) in module (46) and
two wires (45) in module (47). Use contact
insertion/removal tool.
18.
Install five wires (44 and 45) in wire harness (48).
Position wire harness on panel (1).
19.
Install four clamps (49) with four screws (50).
20.
Without 17 , reach behind panel (1) and connect
wire (51) to each postlight assembly (52).
21.
With 17 , reach behind panel (1) and screw wire
(51) to each postlight assembly (52).
INSPECT
FOLLOW-ON MAINTENANCE:
Install radar altimeter (TM 11-1520-240-23).
Install turn and slip indicator (Task 8-45).
Install flange mounted instruments on pilot’s panel
(Task 8-91).
Install clamp mounted instruments on pilot’s panel
(Task 8-89).
Install clock (Task 8-93).
Install emergency power light (Task 8-4).
Perform operational check of affected systems (TM
55-1520-240-T).
END OF TASK
8-338
