TM 55-1520-240-23-6
7-152
REMOVE PRESSURE CONTROL MODULE
(Continued)
7-152
NOTE
The connector to the PTU PLT
V solenoid valve may already be
disconnected and tied back.
1.
Tag and disconnect eight connectors (1) from
module (2).
2.
Tag and remove six tubes (3) from module (2).
Use container and cloths (E135) for spilled fluid.
Use gloves (E186).
3.
Tag and disconnect three tubes (4) from module
(2). Use container and cloths (E135) for spilled
fluid.
4.
Have helper support module (2). Remove four
bolts (5) and washers (6).
5.
Remove module (2) carefully to avoid damage
to tubing.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-673