TM 55-1520-240-23-6
7-125
REMOVE AFT PIVOTING SERVOCYLINDER
(Continued)
7-125
4.
Tilt swashplate (10) for clearance. Support
swashplate with wood block (11).
5.
Remove cotter pin (12), nut (13), two washers
(14), and bolt (15) from link (16).
Positive retention bolts are installed in
the upper controls. They have a pawl
which prevents nut or bolt removal
unless the pawl is depressed.
5.1.
Remove inner bushing (34) and outer bushing
(35).
6.
Have helper support servocylinder (4). Remove
cotter pin (17), nut (18), three or four washers
(19), and bolt (20) from each servocylinder
mount (21).
7.
Remove servocylinder (4).
7-560