TM 55-1520-240-23-6
7-124
REMOVE FORWARD PIVOTING SERVOCYLINDER
(Continued)
7-124
4.
Tilt swashplate (10) for clearance. Support
swashplate with wood block (11).
5.
Remove cotter pin (12), nut (13), two washers
(14), and bolt (15) from link (16). Move link away
from servocylinder (4).
5.1.
Remove inner bushing (15.1) and outer bushing
(15.2) from servocylinder (4).
NOTE
Two washers may have been installed
under nut to allow for cotter pin
installation.
REMOVE SERVOCYLINDER WITHOUT 50
6.
Have helper support servocylinder (4). Remove
cotter pin (17), nut (18), washer (19), slip bushing
(19.1), washer (19.2), countersunk washer
(19.3), and bolt (20) from each servocylinder
mount (21). Go to step 7.
REMOVE SERVOCYLINDER WITH 50
6.1.
Have helper support servocylinder (4). Remove
cotter pin (17), nut (18) two washers (19), and
bolt (20) from each servocylinder mount (21).
Go to step 7.
7.
Remove servocylinder (4).
7-556
