TM 55-1520-240-23-6
7-126
REMOVE FORWARD SWIVELING SERVOCYLINDER
(Continued)
7-126
5.
Tilt swashplate (14) for clearance. Support
swashplate with wood block (15).
6.
Remove cotter pin (16), nut (17), three or four
washers (18), and bolt (19) from link (20). Move
link away from servocylinder (8).
6.1.
Remove inner bushing (19.1) and outer bushing
(19.2) from servocylinder (8).
NOTE
Two washers may have been installed
under nut to allow for cotter pin
installation.
REMOVE SERVOCYLINDER WITHOUT 50
7.
Have helper support cylinder (8). Remove cotter
pin (21), nut (22), washer (23), slip bushing
(23.1), washer (23.2), countersunk washer
(23.3), and bolt (24) from servocylinder mount
(25). Go to step 8.
REMOVE SERVOCYLINDER WITH 50
7.1.
Have helper support cylinder (8). Remove cotter
pin (21), nut (22), two washers (23), and bolt (24)
from servocylinder mount (25). Go to step 8.
8.
Remove servocylinder (8).
7-564
