TM 55-1520-240-23-6
7-111
REMOVE NO. 1 OR NO. 2 FLIGHT CONTROL RESERVOIR/COOLER TEMPERATURE
SWITCH
(Continued)
7-111
NOTE
Procedure is same to remove
temperature switch from No. 1 or
No. 2 flight control reservoir/cooler.
Removal of No. 2 temperature bulb is
shown here.
1.
Open valve (1) and drain reservoir/cooler (2)
through drain (3). Use container and cloths
(E135) for spilled fluid. Use gloves (E186).
2.
Close valve (1).
3.
Disconnect electrical connector (4) from switch
(5).
4.
Remove lockwire from valve (6), bulb (7), and
switch (5).
5.
Remove switch (5) and packing (8) from port (9).
Use cloths (E135) for spilled fluid.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-513