TM 55-1520-240-23-6
7-91
REMOVE INTEGRATED LOWER CONTROL ACTUATOR (ILCA) RELIEF VALVE
(AVIM)
(Continued)
7-91
NOTE
Procedure is same to remove No. 1 or
No. 2 relief valve from roll, pitch, yaw,
or thrust actuator. Removal of No. 1
valve is shown here.
1.
Remove lockwire from relief valve (1) and check
valve (2).
2.
Remove sealant from valve (1).
3.
Remove valve (1) and packing (3) from actuator
(4). Use cloths (E135) for spilled fluid.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-366
