TM 55-1520-240-23-6
7-74
REMOVE AND INSPECT POWER TRANSFER UNIT MOTOR SHAFT SEAL (570973)
(AVIM)
(Continued)
7-74
6.
Remove seal (7) and packings (8 and 9) from
retainer (6).
7.
Remove retainer clip (10), ring (11), and shim
(12) from motor (1). Use retaining ring pliers.
NOTE
Make sure pin does not drop out
during removal.
8.
Remove mating ring (13). Use needle nose
pliers.
9.
Remove pin (14). Use needle nose pliers.
10.
Remove packing (15) from mating ring (13).
11.
Remove rod (5).
12.
Remove motor (1) from vise (2).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-314