TM 55-1520-240-23-6
7-72
INSTALL NO. 1 OR NO. 2 POWER TRANSFER UNIT PUMP
7-72
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 30 to 150 Inch-Pounds
Materials:
Grease (E190)
Parts:
Preformed Packings
Personnel Required:
Medium Helicopter Repairer
Inspector
NOTE
Procedure is same to install pump on
No. 1 or No. 2 unit.
1.
Install nipple (1) and packing (2) in SOL PLT
VALVE port (3).
2.
Apply grease (E190) to shaft (4). Install shaft in
pump (5). Use grease (E190).
3.
Install gasket (6) on pump (5).
7-309
