TM 55-1520-240-23-6
7-48
DISASSEMBLE AND INSPECT ACCUMULATOR (2770529) (AVIM)
(Continued)
7-48
3.
Install nut (2) in vise (4).
4.
Remove shell (5) from nut (2). Turn shell
counterclockwise.
5.
Remove nut (2) from vise (4).
6.
Remove end cap (1) from shell (5). Pull cap.
7.
Remove packing (6) and retaining ring (7) from
end cap (1).
8.
Have machinist remove two pins (8).
8.1.
Inspect lands (8.1) of end cap (1). There shall be
no nicks or burrs.
9.
Remove lockwire from nut (9).
10.
Install shell (5) in vise (4).
11.
Remove nut (9) from shell (5). Use strap wrench.
12.
Remove end cap (10) from shell (5). Pull cap.
13.
Remove packing (11) and retaining ring (12) from
end cap (10).
14.
Have machinist remove two pins (13) from end
cap (10).
7-228
