TM 55-1520-240-23-6
7-47
REMOVE NO. 1 OR NO. 2 POWER CONTROL MODULE ACCUMULATOR
(Continued)
7-47
NOTE
There are two accumulators, one
in No. 1 and one in No. 2 module.
Procedure is same to remove any
accumulator. No. 1 module is shown
here.
1.
Loosen nut (1) and remove gage (2) and packing
(4) from fitting (5). Use cloths (E135) for spilled
fluid. Use gloves (E186).
2.
Remove lockwire from accumulator (6). Remove
accumulator, two retainers (7), and packing (8)
from module (9). Use 2-1/2 inches open end
wrench. Use cloths (E135) for spilled fluid.
7-225
