TM 55-1520-240-23-6
7-45
REMOVE NO. 1 OR NO. 2 POWER CONTROL MODULE PRESSURE
TRANSDUCER
(Continued)
7-45
NOTE
There are two pressure transmitters,
one in No. 1 and one in No. 2 module.
Procedure is same to remove any
pressure transmitter. No. 1 module is
shown here.
1.
Remove lockwire and disconnect connector (1)
from transmitter (2).
2.
Remove transmitter (2) and packing (3) from
PRESS XMTR port (4). Use cloths (E135) for
spilled fluid. Wear gloves (E184.1).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-221
