TM 55-1520-240-23-6
7-43
REMOVE NO. 1 OR NO. 2 POWER CONTROL MODULE PRESSURE SWITCH
(Continued)
7-43
NOTE
There are two pressure switches, one
in No. 1 and one in No. 2 module.
Procedure is same to remove any
pressure switch. No. 1 module is
shown here.
1.
Disconnect connector (1) from switch (2).
2.
Remove switch (2) and packing (3) from SYS
PRESS SW port (4). Use cloths (E135) for
spilled fluid. Use gloves (E186).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-217
