TM 55-1520-240-23-6
7-322
FLUSH WHEEL BRAKE PRESSURE TUBING
(Continued)
7-322
63.
Working left of console, disconnect three hoses
(32, 34, and 35) from tee (33). Remove tee. Use
cloths (E120) for spilled fluid.
64.
Disconnect hose (32) from tube (28).
65.
Connect tube (28) to port (61) of valve (31).
66.
Disconnect hose (34) from tube (29).
67.
Connect tube (29) to port (62) of valve (31).
68.
Disconnect hose (35) from tube (30).
69.
Connect tube (30) to port (63) of valve (31).
70.
Repeat steps 63 thru 69 for inboard valve (36).
71.
Working at pilot’s outboard cylinder (22),
disconnect hose (20) from hose (23).
72.
Connect hose (20) to BRAKE port (21) of cylinder
(22). Remove tag.
73.
Connect hose (23) to PRESS port (24) of cylinder
(22). Remove tag.
74.
Repeat steps 71, 72, and 73 for pilot’s inboard
cylinder (25), and copilot’s inboard and outboard
cylinders (26 and 27).
75.
Working from forward left work platform, remove
plug (19) from tee (17).
76.
Disconnect two tubes (15 and 16) from tee (17).
77.
Connect tee (17) to accumulator (18).
78.
Connect two tubes (15 and 16) to tee (17).
7-1172
