TM 55-1520-240-23-6
7-323
FLUSH POWER STEERING PRESSURE TUBING
(Continued)
7-323
Filter assembly kit
ADHT6814-M9716M must be
installed in test stand pressure
line. Otherwise, system can be
contaminated.
NOTE
To operate hydraulic test stand, refer
to applicable manual.
1.
Working from ramp, disconnect tube (1) from
BK STRG PRESS port (2) of pressure control
module (3).
2.
Connect test stand pressure hose (4) to tube (1).
3.
Connect hose (5) to IN PRESS tube (6).
4.
Connect hose (5) to SWVL UNLOCK tube (7).
5.
Connect hose (8) to PWR STRG PRESS tube
(9).
6.
Connect hose (8) to SWVL LOCK tube (10).
7.
Connect test stand return hose (11) to PWR
STRG RTN tube (12).
8.
Disconnect tube (13) from INLET port (14) of
pressure reducer (15).
9.
Install plug (16) in tube (13).
7-1176
