TM 55-1520-240-23-6
7-322
FLUSH WHEEL BRAKE PRESSURE TUBING
(Continued)
7-322
8.
Working from forward left work platform,
disconnect two tubes (15 and 16) from tee (17)
of wheel brake accumulator (18).
9.
Disconnect tee (17) from accumulator (18).
10.
Connect two tubes (15 and 16) to tee (17).
11.
Install plug (19) in tee (17).
12.
Working in cockpit, tag and disconnect BRAKE
hose (20) from port (21) of pilot’s outboard brake
cylinder (22).
13.
Tag and disconnect PRESS hose (23) from port
(24) of cylinder (22).
14.
Connect hose (20) to hose (23).
15.
Repeat steps 12, 13, and 14 for pilot’s inboard
cylinder (25), and copilot’s inboard and outboard
cylinders (26 and 27).
16.
Working left of console, disconnect three tubes
(28, 29, and 30) from outboard brake transfer
valve (31).
17.
Connect hose (32) to tube (28) and tee (33).
18.
Connect hose (34) to tube (29) and tee (33).
19.
Connect hose (35) to tube (30) and tee (33).
20.
Repeat steps 16 thru 19 for inboard brake
transfer valve (36).
7-1167
