TM 55-1520-240-23-6
7-308
REMOVE SWIVEL LOCK ACTUATING CYLINDER ACTUATOR
(Continued)
7-308
NOTE
This task is same for left or right
actuating cylinders. Right is shown
here.
1.
Tag and disconnect two hoses (1) from cylinder
(actuator) (2). Use container and cloths (E135)
for spilled fluid. Use gloves (E186).
2.
Loosen nut (3), disconnect tube (4) from tee (5).
3.
Loosen two nuts (6).
4.
Remove elbow (7), washer (8), and packing (9).
5.
Remove tee (5), washer (10), and packing (11).
6.
Remove lockwire from four bolts (12).
7.
Remove four bolts (12) and washers (13).
Remove actuator (2).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-1115
