TM 55-1520-240-23-6
7-310
CLEAN SWIVEL LOCK ACTUATOR PARTS (AVIM)
7-310
INITIAL SETUP
Applicable Configurations:
All
Tools:
Hydraulic Repairer’s Tool Kit, NSN 5180-00-323-4891
Hand Oiler, 16 Ounce
Container, 2 Quart
Paint Brush, Size 6
Materials:
Cloths (E135)
Dry Cleaning Solvent (E162)
Hydraulic Fluid (E199)
Gloves (E186)
Personnel Required:
Aircraft Pneudraulics Repairer
Equipment Condition:
Off Helicopter Task
Swivel Lock Actuator Disassembled (Task 7-309)
General Safety Instructions:
Dry cleaning solvent (E162) is
flammable and toxic. It can irritate
skin and cause burns. Use only in
well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Hydraulic fluid (E199) is toxic. It can
irritate skin and cause burns. Avoid
inhaling. Use only with adequate
ventilation. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
1.
Remove dirt, oil, and grease from washer (1),
spring (2), sleeve spacer (3), and rod end clevis
(4). Use dry cleaning solvent (E162) and brush.
Use goggles for eyes.
7-1118
