TM 55-1520-240-23-6
7-271
REMOVE CARGO RAMP ACTUATING CYLINDER
(Continued)
7-271
NOTE
Procedure is same to remove left or
right ramp actuating cylinders. Right
cylinder is shown here.
1.
Remove bolt (1), washer (2), and packing (3)
from ramp (4) at lower end of actuating cylinder
(5).
2.
Tag and disconnect three hoses (6) from cylinder
(5). Use container and cloths (E135) for spilled
fluid. Use gloves (E186).
3.
Tag cylinder (5). Have helper hold cylinder (5).
Remove nut (7), two washers (8), and bolt (9)
from fitting (10). Depress and remove cylinder.
4.
Remove three nipples (11) and packings (12)
from cylinder (5).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-1013