TM 55-1520-240-23-6
7-272
REPAIR CARGO RAMP ACTUATING CYLINDER (AVIM)
(Continued)
7-272
11.
Loosen nut (5) and remove bearing (7) from
piston (6).
12.
Remove washer (8) and nut (5) from bearing (7).
13.
Install nut (5) and washer (8) on new bearing (7).
14.
Install bearing (7) in piston (6), to dimension A,
recorded in step 10.
15.
Make sure tab of washer (8) fits into groove in
piston (6). Tighten nut (5) and washer against
piston.
16.
Hold bearing (7) and torque nut (5) to 1200
inch-pounds.
17.
Lockwire nut (5) to washer (8). Use lockwire
(E231).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-1016
