TM 55-1520-240-23-6
7-272
REPAIR CARGO RAMP ACTUATING CYLINDER (AVIM)
7-272
INITIAL SETUP
Application Configurations:
All
Tools:
Hydraulic Repairer’s Tool Kit, NSN 5180-00-323-4891
Torque Wrench, 700 to 1600 Inch-Pounds
Arbor Press
Staking Die (2)
Crowfoot Wrench, 1 Inch
Open End Wrench, 1 Inch
Materials:
Castor Oil (E93) or Grease (E189)
Lockwire (E231)
Parts:
Bearing
Rod End Bearing
Personnel Required:
Aircraft Pneudraulics Repairer
Inspector
References:
TM 55-1500-322-24
TM 55-1520-240-23P
Equipment Condition:
Off Helicopter Task
REPLACE BEARING
1.
Install cylinder (1) in arbor press as shown.
2.
Remove bearing (2) from bushing (3) (TM
55-1500-322-24).
7-1014
