TM 55-1520-240-23-5
6-216
INSTALL RIGHT ENGINE TRANSMISSION OIL COOLER
(Continued)
6-216
3.
Install bolts (6), washers (7) and nuts (8) at three
places around inside of cooler (4). Torque nuts
to 70 inch-pounds.
4.
Position bracket (9) on mounting lug (10). Install
bolts (11), washers (12) and nuts (13) at six
places around outside of cooler (4). Torque nuts
to 70 inch-pounds.
5.
Install baffle (12) on four studs (13) on sump
cover (14). Install washers (15) and nuts (16).
Torque nuts to 70 inch-pounds.
Oil (E254) is toxic. It can irritate skin
and cause burns. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
In case of contact, immediately flush
skin or eyes for at least 15 minutes.
Get medical attention for eyes.
6.
Coat packing (17) and thread of reducer (18) with
oil (E254). Install reducer, with packing, in cooler
(4). Torque reducer to 80 inch-pounds.
7.
Coat thread of hose (19) with oil (E231). Connect
hose to reducer (18).
8.
Connect hose (20) to pressure transmitter (21).
9.
If drain plug (22) is not lockwired, lockwire plug
to cooler (4). Use lockwire (E231).
6-706
